Straight lines set the tone from the first view, with large glass areas cut into a light masonry shell and deep overhangs casting sharp shade across the terrace. The result is a modern villa with sustainable energy systems, where the clean geometry reads just as clearly outside as it does once you step toward the openings. Dark frames, pale brickwork and broad paved surfaces keep the composition restrained while the glazing opens the house to the garden.

CLT carried above ground, then finished by hand

Above ground, the villa was built with CLT, or cross laminated timber, a structural timber product used here for its durable, ecological and visual qualities. That choice gives the project a clear construction logic before any finishing layer comes into play. The upper volume is then completed in the traditional way, with close attention to the edges, joints and transitions that define the exterior surfaces. It is a measured approach: timber as structure, masonry and detailing as the visible finish.

From the outside, that sequence can be read in the way the massing holds together. A dark recessed zone sits beneath the cantilevered part of the building, while the lighter wall surfaces carry vertical window openings and narrow frames. The material contrast is not decorative. It helps the modern villa with sustainable energy systems feel grounded, with each layer doing a clear job in the composition.

Glass, shade and a direct link to the garden

Large glass areas give the house its open rhythm. In several views, the glazing stretches beside the terrace and along the garden edge, while deep overhangs soften the brightness and mark the transition between inside and outside. Grey paving slabs run around the house and continue toward the pool, so the route reads as one continuous outdoor sequence rather than separate patches of hardscape. The rectangular pool follows that same line, with a tiled border that sharpens the geometry.

Light masonry, black frames and broad stone surfaces shape the exterior without relying on excess. A side path of rectangular pavers cuts through the grass, leading toward the building under the shelter of the overhangs. Elsewhere, a darker garage-like volume and the grey driveway bring in heavier tones. Those details keep the modern villa with sustainable energy systems tied to the ground, even as the glazing opens wide to the green setting beyond.

Quiet contrast in the facade and terrace

One of the strongest impressions comes from the way the wall surfaces change in light. The pale brick catches the sun; the darker elements pull the eye back to the openings, the joints and the recessed parts. On the terrace, the paving is plain and exact, which lets the water, the lawn and the house share the same frame. The result is not soft or decorative. It is crisp, with the geometry of the pool and the straight edge of the building reinforcing one another.

Ground-source heat, passive cooling and controlled air

Inside the modern villa with sustainable energy systems, the listed technical measures are as clear as the exterior lines. Ground-source heat with a heat pump is part of the setup, together with passive cooling, a ventilation system type D and solar PV panels. The source material does not turn these into performance claims, and it does not need to. Their presence already says something about the house: the services are treated as part of the project, not hidden away as an afterthought.

Because the interior images focus on surfaces and built-in elements, the technical layer stays largely invisible, but the spatial effect is easy to read. A glass wall brings light deep into the house. Stone floors reflect it in a muted way. The bathroom shows a white bathtub set against a dark opening with horizontal blinds, while the surrounding walls and floor remain pale and smooth. In that setting, the modern villa with sustainable energy systems feels technically dense without looking busy.

Woodwork, stone and a calm kitchen wall

The kitchen image shifts the attention to material detail. Vertical timber panels run across the wall, interrupted by a built-in niche with a dark oven front. The grain of the wood gives the surface depth, but the layout stays firm and direct. In the background, a large glazed opening connects the room to the outdoor light. It is a compact composition, built from a few strong elements rather than a long list of finishes.

That same restraint appears in the bathroom. A white freestanding bath sits in front of a dark window opening, while horizontal slats filter the view. The floor and wall surfaces are light stone or tile, which keeps the room visually open even in a small frame. Nothing here tries to compete with the architecture. The materials support the lines of the room and echo the clearer exterior language of the modern villa with sustainable energy systems.

Where the house meets the trees

Seen from the garden, the villa sits between structured hard surfaces and a wooded backdrop. The large glass openings take in the greenery, while the overhangs and dark accents keep the façade crisp against the softer surroundings. The rectangular pool, the grey terrace slabs and the lawn form a sequence of measured planes around the house. It is this combination of sharp outline, glass and grounded surfaces that gives the project its strongest presence in the landscape.

The final impression comes from the way each part relates to the next: the CLT structure above ground, the finished outer surfaces, the deep shade lines, the pool edge and the indoor timber details. Nothing is overworked. The modern villa with sustainable energy systems relies on proportion, material contrast and a clear reading of its construction. That is what stays with you after the last image: a house built from straight lines, broad openings and a set of technical choices that are visible in the way the spaces are put together.