A slim rectangle on the wall is doing most of the visual work here. The wall mounted EV charger keeps its profile tight, with a powder-coated steel shell and a front accent that reads clearly from a distance. In the exterior views it sits against brick and mesh, while the interior image shows the same unit as a neat vertical form with a narrow light edge. The result is a compact EV charging unit that stays present without taking over the wall.

Form that stays close to the wall

The enclosure is pared back to simple planes and sharp edges. There is no extra trim, only a front surface that changes slightly around the connector opening and the light window. That restraint suits residential parking spots and office settings where floor space is limited, or where a post would be too dominant. Seen in profile, the unit reads as a compact EV charging unit first, a technical device second. The wall-mounted position keeps the ground clear and gives the cable a direct route downward.

Four finishes change the tone without changing the shape: Imperial Black, Cotton White, Midnight Blue and Medusa Green. On the wall, each colour shifts the way the steel catches light. The darker versions absorb reflections, while the lighter one makes the rectangular outline easier to read. A small visual change, but an effective one when the charger sits near brickwork, painted masonry or a fence line.

Powder-coated steel and a separate electrical enclosure

The shell is made of powder-coated steel, which gives the unit its clean surface and compact read. The charging electronics sit in a separate electrical enclosure placed indoors, so the visible wall unit remains slim. That split is practical, but it also changes the look of the product. On the wall, there is less bulk, fewer interruptions and a more controlled line around the front panel. For a project page, that separation is part of the story: the visible form stays calm while the technical core is kept elsewhere.

The photographs make that split easier to read. One image places the unit on a white brick wall, with the cable dropping in a straight line. Another shows the charger against a mesh fence with leaves behind it, where the black housing and the light strip stand out against the textured background. A third image brings the same product indoors, where the vertical opening and soft edge lighting sharpen the geometry. Across all four views, the enclosure remains the same measured rectangle.

Up to 22 kW charging with smart control

The technical range reaches up to 22 kW charging in Mode 3, depending on the installation and grid connection. The stated range runs from 3.7 kW to 22 kW, so the unit can be set within that span as the project requires. RFID authentication is standard, and ISO 15118 support opens the door to plug and charge as well as bidirectional charging. That makes the wall mounted EV charger more than a fixed point on the wall; it becomes part of a larger charging setup that can adjust to different use patterns.

Intelligent charging control is built in through integration with energy management systems such as KNX, Loxone and Qbus. Communication is also supported via Modbus, MQTT or REST API, which lets the charger sit inside a broader digital network. For site management, OCPP compatibility allows session handling, billing and remote control. These are not decorative features, but they shape how the unit behaves once it is installed and connected.

Designed to work with a wider energy setup

The project text links the charger to an energy ecosystem that can include solar panels, battery storage and an EMS. That matters because the unit is described as part of a system, not as a solitary device. In practice, the wall mounted EV charger can respond to energy flows across the site, which is why its smart control features are central to the page. The visual language stays quiet, but the technical reach is broad.

Safety measures hidden behind the clear front

Behind the slim front, the unit includes a differential module that detects 6 mA DC and 30 mA AC currents. Dynamic load balancing is mentioned as a way to prevent peaks and use the available grid capacity more intelligently. Those functions are not visible in the exterior views, yet they explain why the compact EV charging unit can remain light in appearance without giving up protection. The clear front and the protected electronics work together, even if only one of them is seen.

The dimensions keep the product compact: 350 × 350 × 136 mm for the wall unit, and 450 × 315 × 155 mm for the electrical enclosure. Between both parts, the required cabling is specific: a 5G 6 mm² power cable and a CAT 7 SFTP data cable. Those numbers matter because they show how the visible form is supported by a separate technical package. The wall-mounted part stays slim; the rest is organized in the installation cabinet.

Where the unit makes sense

The strongest use cases are the ones where space is tight and the charger should not dominate the setting. In a private parking area, the unit can sit close to the wall and leave the ground clear. In an office environment, the same rectangular form reads neatly beside masonry or a fence line. Because the charger combines up to 22 kW charging with intelligent charging control, it fits projects that need both visual restraint and operational flexibility. The wall mounted EV charger does not ask for attention, but it gives the wall a clear technical role.

The colour range also helps it settle into different contexts. Imperial Black works with darker openings and metal surfaces. Cotton White reads more quietly against brick. Midnight Blue and Medusa Green add a little depth without changing the product’s controlled geometry. The front accent, seen in close-up, gives the unit just enough detail to break the plane, while the rest stays stripped down. That balance is built into the object itself, not added afterwards.

A compact wall-mounted EV charger with room for future use

What defines the wall mounted EV charger is not only its output or connectivity, but the way it keeps those features inside a measured shell. The powder-coated steel body, separate electrical enclosure, RFID access, ISO 15118 support and OCPP compatibility all point in the same direction: a compact EV charging unit that can sit in homes and offices without becoming visually heavy. The exterior images and the interior detail confirm the same thing from different angles. It is a technical object, but one that knows how to stay close to the wall.