Terrace levels do the first bit of work here. A drop of roughly 60 cm sets the rhythm between the front part of the garden and the rear terrace, and the inox plunge pool follows that shift instead of fighting it. The waterline sits tight against the edge, so the surface reads almost like a mirror between the brick walls, the planting borders and the stone paving.

A compact garden remade around water

The garden was fully redesigned, with new planting and fresh terraces replacing the former layout. What now runs through the space is a clear sequence of hard surfaces, narrow planting strips and the long stainless-steel basin. The pool is only 6 x 1.5 x 1.2 m, yet its proportion gives it presence. It works as an inox plunge pool and as a water feature, which was the starting point from the first conversations around the project.

That dual use gives the garden its logic. Instead of placing a decorative basin beside the terraces, the water element becomes part of the daily route across the site. The shape stays restrained and the construction follows the lines of the paving. From the side, the modern terrace pool reads as a long, low volume framed by stone, brick and planting, with no extra gestures needed to explain it.

The infinity edge that comes from a level change

The terrace level difference pool uses the garden’s own height shift to create its most visible effect. Water runs over the inox edge at one short end and along part of one long side, which lets the surface spill visually beyond its container. The result is a mirror water effect rather than a heavy border. In the photographs, the pool edge reflections catch the brick wall, the sky and the surrounding greenery in one plane.

That detail changes the way the basin is read. The stainless-steel coping draws a crisp line, but the moving water softens it immediately. Seen from the patio, the infinity edge sits almost flush with the terrace and extends the space optically toward the rear of the garden. Seen closer up, the same edge becomes a thin strip where the water folds over and disappears from view.

Water, steel and a very small margin

The narrow width of the basin matters. At 1.5 m, the pool is not built for laps or long movement; it is sized for a quick dip and for cooling off when the garden heats up. The source text notes that the dimensions and technical setup were adjusted so the pool can be used comfortably for a short plunge. Even in the first spring sun, it is meant to be usable, which explains the compact, direct form.

Because the pool is so slim, the inox material takes on more of the visual load. It gives the water edge a clean profile and keeps the whole volume legible between the terraces. The mirror water effect appears stronger when the basin is read from the long side, where the reflections stretch across the surface and the stainless-steel line almost disappears into the water.

Planting that softens the brick and stone

Green borders run close to the pool, with grasses and purple flowering accents breaking the hard line of the paving. They sit in front of brick walls and beside glass openings, so the planting has to do real visual work. It shifts the garden away from pure geometry without hiding the structure. The result is a brick wall pool setting that still feels defined, but no longer rigid.

From one angle, the planting frames the basin; from another, it lets the stainless steel stay exposed. That change in depth matters in a compact urban garden pool, where every strip of ground has to earn its place. The borders also echo the reflections in the water, so the foliage appears twice: once at the edge of the terrace, and once again as a softened image in the surface.

Seen through the house and patio openings

Several images place the pool against large glazed openings, which reinforces the connection between inside and outside. The water line is visible from the patio and from the house, so the basin is not hidden at the back of the garden. Instead, it becomes part of the view corridor. The long stainless-steel body sits parallel to the architecture, while the brick wall behind it gives the scene a grounded background.

In closer shots, the inox plunge pool shows its geometry more clearly. The coping is sharp, the corners stay controlled, and the water surface meets the edge with little visual interruption. Those details are what make the project read as more than a small pool insert. The garden was reworked around a specific water volume, and every terrace line points back to that decision.

Why inox gives the pool its character

Inox changes both the look and the maintenance story of the pool. The source describes it as maintenance-friendly, durable and more energy-efficient than traditional systems, and that description fits the visual tone of the project: clear edges, little visual clutter, no decorative layering. The material’s bright surface also keeps the water edge readable against the stone paving and the brick backdrop, which is especially important in a narrow urban garden.

What remains after the redesign is a controlled composition of height, reflection and planting. The new terraces hold the change in level, the inox infinity plunge pool uses that shift to create its edge, and the garden around it provides texture instead of distraction. In a compact site, that makes the water feature feel deliberate from every angle, whether seen across the paving, from the patio, or in close-up at the waterline.