The rooftop terrace pool sits in a narrow recess of stone and planting, so the water is framed before it is even reached. Composited deck boards run right up to the pool edge, while a custom bench in white polyplaster follows the line of the basin. Above it, the louvered canopy cuts the light into strips. The result is a roof terrace that reads in layers: stone, wood-look decking, glass, leaves and water.

Stone surfaces around the pool niche

Light beige stone cladding gives the side walls a textured surface that catches shadow at different times of day. The pool is set into a built-in pool niche, with a small stair made from deck boards leading down into the water. Instead of a hard, technical edge, the basin is wrapped in materials that repeat across the terrace: composite decking, large ceramic tiles on roof tile supports, and beach pebbles underfoot. That mix keeps the ground plane varied without breaking the layout into separate zones.

From the lounge side, the stone wall behind the pool acts as a quiet backdrop. Open niches are cut into it, and small points of light are tucked into the wall, floor and planting beds. The lighting stays low and precise. It picks out the texture of the stone cladding terrace after dusk and leaves the broader surfaces in shadow.

Planting that screens and softens the edges

A dense green privacy wall runs beside the water and helps screen the terrace from view. It is not a single flat panel, but a layered planting composition with winter-green ferns, grasses and taller leaves in white aluminium planters. The planting sits close to the pool, so the leaves almost touch the circulation path. That proximity changes the scale of the terrace. The roof feels more enclosed, and the pool zone gains depth without needing more floor area.

The green wall also hides what should stay out of sight. Behind it sits a cabinet that keeps the pool equipment concealed and leaves room for cushions and garden tools. An irrigation system is built into the planted wall, so the greenery can remain dense around the year. Seen from indoors, the wall reads as a vertical field of leaves rather than a technical screen, with the skyline beyond it adding a second layer of depth.

A louvered canopy and glass terrace enclosure

The louvered canopy was already part of the terrace and remains one of the clearest spatial gestures. Its horizontal slats temper the direct sun, and the roof line gives the terrace a fixed upper edge. Below it, a glass terrace enclosure closes off the bathing area in colder seasons. The enclosure works with the wide glazing of the interior, so the transition from inside to outside stays visible even when the terrace is shut.

That glass layer changes how the pool is used. The water remains readable through the panels, and the terrace does not disappear when it is closed. Instead, the pool niche, the bench and the planted edges are still part of the view from inside. The enclosure also keeps the roof terrace pool in use beyond the warm months, which is especially clear in the way the sliding panels sit flush beside the stone and decking.

Evening lighting across floor, wall and planting

When the light drops, the terrace becomes about reflections rather than surface area. Small fixtures are placed in the floor, in the niches and among the planting, so the light arrives in short intervals instead of a broad wash. The stone wall gains a thin line of glow, the deck reads warmer, and the water picks up faint movement from the lamps nearby. This evening lighting is restrained, but it gives the terrace a legible structure after dark.

Seen at dusk, the roof terrace pool feels contained rather than exposed. The bench beside the basin, the planted wall and the stone cladding terrace all register as separate parts, yet they remain visually linked by the same low light. Nothing flashes or dominates. The scene is built from small sources that guide the eye from the glazing to the pool edge and back to the planting.

Poolside lounge seating with a direct view line

Along the pool edge, poolside lounge seating is arranged to face the water and the views beyond it. The woven furniture sits on the raised deck and is paired with weather-resistant cushions, which keeps the seating visually light against the heavier stone walls. The bench by the pool follows the length of the basin, so the seating line and the waterline almost run in parallel. That alignment makes the terrace easy to read at a glance.

From the interior, the relationship between the lounge, the green privacy wall and the roofline becomes clearer. Large glazed openings connect both sides of the threshold, and the terrace appears as an extension of the room rather than a separate outdoor platform. The eye moves from the darker interior to the planted wall and then outward to the city view. The rooftop terrace pool sits at the centre of that sequence, anchored by stone, glass and water.

Materials that hold the composition together

Composite decking, ceramic paving, beach pebbles and light stone cladding terrace the surface in distinct bands, each with its own texture underfoot. The white aluminium planters introduce a harder line among the leaves, while the polyplaster bench reflects more light than the surrounding stone. These materials do not compete. They work as a measured set, each one marking a different use zone around the pool niche and the seating area.

The strongest detail is perhaps the way the water sits against the wall. A narrow channel and the planted edges bring movement close to the stone, so the terrace never feels static. Even the small storage cabinet behind the green wall belongs to that logic: it keeps the working parts hidden and leaves the visible composition intact. On this rooftop terrace pool, every surface has a job, and every line supports the next.